Fibers from Old Tires Can Improve Fire Resistance of Concrete

A new way of protecting concrete from fire damage using materials recycled from old tires has been successfully tested by researchers at the University of Sheffield.

The team used fibers extracted from the textile reinforcement commonly embedded into tires to guarantee their performance. Adding these fibers to the concrete mix was shown to reduce the concrete’s tendency to spall – where surface layers of concrete break off – explosively under the intense heat from a fire.

Using man-made polypropylene (PP) fibers to protect concrete structures from damage or collapse if a fire breaks out is a relatively well-known technique. Many modern structures, including large scale engineering projects such as Crossrail, have used concrete that includes PP fibers for protection against fire spalling.

The Sheffield study is the first to show that these fibers do not have to be made from raw materials, but can instead be reclaimed from used tires. The results are published in the journal Fire Technology.

“We’ve shown that these recycled fibers do an equivalent job to ‘virgin’ PP fibers which require lots of energy and resources to produce,” explains lead author Dr Shan-Shan Huang, in the Department of Civil and Structural Engineering at the University of Sheffield.

“Using waste materials in this way is less expensive, and better for the planet.”

The fibers melt under the intense heat from a fire, leaving networks of tiny channels. This means that moisture trapped within the concrete is able to escape, rather than becoming trapped, which causes the concrete to break out explosively.

“Because the fibers are so small, they don’t affect the strength or the stiffness of the concrete,” says Dr Huang.

“Their only job is to melt when heat becomes intense. Concrete is a brittle material, so will break out relatively easily without having these fibers help reducing the pressure within the concrete.”

Protecting the concrete from fire spalling means that steel reinforcements running through the concrete are also protected. When the steel reinforcements are exposed to extreme heat they weaken very quickly, meaning a structure is much more likely to collapse. The Liverpool Waterfront Car Park suffered this kind of damage during a fire in 2017, leading to the entire structure eventually having to be demolished.

Collaborating with Twincon, a Sheffield-based company that develops innovative solutions for the construction industry, the researchers have also developed technologies for reclaiming the fibers from the used tires.

This involved separating the fibers from the tire rubber, untangling the fibers into strands, and then distributing them evenly into the concrete mixture.

The team plan to continue testing the material with different ratios of the fibers to concrete, and also using different types of concrete. They also plan to find out more about how the materials react to heat at the microstructure level. By scanning the concrete as it is heated, they will be able to see more precisely the structural changes taking place inside the material.

No Comments Yet

Leave a Reply

Your email address will not be published.

©2023 Global Security Wire. Use Our Intel. All Rights Reserved. Washington, D.C.